Debris escapes from the robot
Debris leaks outside at the filter cover
Float sinks
Robot cannot be charged / recharged
Please respect the European Union regulations and help to protect the environment.
Return non-working electrical equipment to a facility appointed by your municipality that
properly recycles electrical and electronic equipment. Do not dispose them in unsorted waste
bins. For items containing removable batteries, remove batteries before disposing of the
product.
© 2018 Kokido Development Ltd.
All rights reserved. No part of this document may be reproduced or transmitted in any form or
by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior
written permission of Kokido Development Ltd. (V1)
If soft copy of this instruction manual is required, please contact our customer service by email:
customerservice@kokido.com
SAVE THESE INSTRUCTIONS
Manufacturer: Kokido Development Limited.Unit 1319, Sunbeam Centre, 27 Shing Yip Street, Kwun Tong, Kowloon, HK
Suction mouth's flap ( at
cleaner bottom) is damaged
Debris clogged at suction
mouth and prevents the flap to
close.
Draining filter plate is broken or
not in place
Filter cover net is damaged
Float is broken and water leaks
in
Battery is damaged
Charging cable is not
completely connected with
external adaptor and robot.
External adaptor is out of order
Environmental Programmes, WEEE European Directive
Suction mouth's flap works like a door to prevent the
debris from escaping from the debris compartment.
Contact dealer for replacement parts and instruction.
Remove clogged debris from the suction mouth.
Make sure the draining filter plate is in place and replace
with a new one if necessary before next use.
Replace with a new filter cover. Contact your dealer for
replacement parts.
Replace with a new float. Contact your dealer for
replacement parts.
Contact dealer for battery replacement.
WARNING!
DO NOT replace the battery by
yourself. This could result in severe or fatal injuries and
the warranty will be voided as a result.
Make sure that the charger cable is connected with
external adaptor and robot properly and completely.
Refer to instruction manual.
Contact dealer for replacement.
WARNING!
Using the wrong external adaptor
will result in damaging the robot / battery and voiding the
warranty as a result.
18009028
20