Function Control
1
Enter Function Control mode
Press the [FNC] button.
Function icon is displayed.
2
Select your desired setup item
Operation type
Operation
Movement between items
Turn the Control knob.
Selection of item
Press the Control knob.
Return to previous item
Press the [FNC] button or "
Repeat selection and determination until your
desired setup item is selected.
Example:
MENU
3
Make a setting
Turn the Control knob to select a setting value,
and then press the Control knob.
• The value of items with
pushing the Control knob towards right or left.
• Some items require you to keep pressing the
Control knob for 1 or 2 seconds so that you can
make a setting. For these items, the time during
which you need to keep pressing the Control
knob is displayed in the Entry column in seconds.
• For the functions accompanied by the
description of the setting procedure and so forth,
the reference page numbers are displayed.
4
Exit Function Control mode
Press the [FNC] button for at least 1 second.
8
|
KDC-BT838U
" icon.
MENU
DISP
DISP
TYPE
TEXT
mark can be set by