Kenwood KDC-BT838U Mode D'emploi page 7

Category Item Setting
"DEMO Mode" "OFF"/ "ON"*
DISP > TYPE A/ B/ C/ D/ E/ F/ G
> GRAPH Spectrum Analyzer
1 – 2
> SIDE Text icon/ Source
icon
> TEXT
BT > V-REC
> VOICE >
NAME
> VOICE > TYPE
> SMS > SMSDL
> SMS > INBOX
P.MEM
SCAN* 1 "ON"/ —
RDM "ON"/ —
FiREP "ON"/ —
FoREP "ON"/ —
SCAN "ON"/ —
RDM "ON"/ —
M.RDM "ON"/ —
T.REP "ON"/ —
D.REP "ON"/ —
*Factory setting
Displayed item is depending on currently selected
source or mode. The mark in Condition column
shows the condition to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB/iPod.
: Can be set while Audio file source of CD/USB
(excluding iPod).
: Can be set while CD/ Disc changer source.
: Can be set while Disc changer source.
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
: Can be set while HD Radio source.
: Can be set during Satellite radio source.
: Can be set only during playback of the iPod source.
(USB source used when the iPod is connected)
: Can be set for sources other than the standby
source by setting "2 ZONE" of <Audio Setup> (page
20) to "ON".
: Can be set while a cell-phone is connected.
Entry Setting overview
2 sec.
Specifies whether to enable demonstration.
Sets the display pattern.
Sets the Type E spectrum analyzer display.
Sets the Type A side icon display.
Sets the text display.
Make a voice dialing call.
Register a name tag for voice recognition.
Register a type (category) voice tag for voice recognition.
Download a short message.
Display the received short message.
Presets a station.
When set to "ON", plays the intro of the music in the folder
successively.
When set to "ON", plays the music in the folder randomly.
When set to "ON", plays the music repeatedly.
When set to "ON", plays the music in the folder repeatedly.
When set to "ON", plays the intro of the music on the disc
successively.
When set to "ON", plays the music on the disc randomly.
When set to "ON", plays the music in the disc changer
randomly.
When set to "ON", plays the music repeatedly.
When set to "ON", plays the music on the disc repeatedly.
Å–Ï : Can be set when the specified type is selected for
⁄
• Refer to the respective page for information on how to
• Only the items available to the current source are
• Strong electrical fields (such as from power lines) may
1
*
: Refer to the reference page.
Display Type.
— : Can be set during all sources.
set the items with reference page number.
displayed.
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
Location played with "File Scan"
- Audio file: First 10 seconds
- Music Editor media: First 10 seconds or the part picked
by Intro Skip.
During Intro Skip, turn the control knob left or right to
change the song.
The scan method depends on the Music Editor setting.
See the Music Editor help for details.
Condition Page
— 19
— 10
‰
Å
ÅıÇ
10
ÎÏ
16
26
26
27
27
13, 29
Next page 3
7
|
English