Sony DPP-EX5 Mode D'emploi page 18

3 Loading the print cartridge
Notes
• Never put your hand into the cartridge compartment. The thermal head reaches high
temperatures, especially after repeated printing.
• Do not rewind the ink ribbon and use the rewound print cartridge for printing.
Otherwise, proper printing result will not be obtained, or even a breakdown may
occur.
• If the print cartridge does not click into place, remove it and then re-insert it. If the
ink ribbon is too slack to be loaded, wind the ink ribbon in the direction of the arrow
to remove the slack.
• If the print cartridge is not loaded when you turn on the printer, the
indicator lights up.
• Do not touch the ink ribbon or place the print cartridge in a dusty location.
Fingerprints or dust on the ink ribbon may result in imperfect printing.
•Do not change the print cartridge while printing.
Notes on storing the print cartridge
• Avoid placing the print cartridge in a location subject to high temperatures, high
humidity, excessive dust or direct sunlight
• When you are going to store a partially-used cartridge, store it in its original bag.
18 GB
/