Muuwmi 464 Mode D'emploi page 6

EN Owner's manual
After you have folded out the handlebar stem upwards, the axle of
the quick release locking system has to lock-in into the mount and
the quick release lever has to be securely closed. If necessary, you can
adjust the quick release locking system to the correct tension, by
tightening or loosening the securing nut.
Feed the handles of the scooter in to the handlebar head until the
click closures lock into place.
Open the quick-release lock and pull out the handlebar stem until the
automatic latch engages. Then close the quick-release lock again.
The clamp tension of the quick-release lock can also be adjusted by
tightening or loosening the securing nut.
Pictures are
design examples.
Folding in the scooter
Open the quick-release lever and slide in the handlebar stem by
pressing in the click closure.
Press-in the click closures and pull the handles out of the handlebar
head.
Open the quick-release lever and pull the internal plastic slider
upwards until the axle of the quick release locking system is released
from the mount.
Art.-No: 464
Status 10/18
Page 6/16