Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Load Roller (1)
ASSEMBLY & INSTALLATION
1. First, open the hardware bag
and remove the 6mm Allen wrench
along with 6 pieces of hardware
(Allen bolt, washer and T-nut).
2. Pair one Allen bolt, washer and
T-nut with a mounting bracket and install as shown. Apply
the T-nuts and leave them loose. Repeat with remaining
bracket.
3. Remove one end cap from the rear load bar of your truck rack. Load stops and rubber inserts will need
to be removed from T-slot if installed.
Mounting Brackets w/
Hardware (2)
PARTS LIST
3/16" Installation
Wrench
Publicité
Table des Matières
