Assembly & Installation - MALONE STRIPER-4 Manuel D'installation

MALONE
Mounting Brackets (4)
5/32" Allen Wrench (1)
3/16" Allen Wrench (1)
Assembly & Installation
Assembling the Handle Tubes: 1. Using the
larger 3/16" allen wrench, hold it parallel to the
surface and place a socket head screw on the tip.
Carefully pass it trough the top of the handle tube
and through the bottom. See image 1
2. Align the teeth of the handle tube(s) to the base
and install the two middle units first. Secure fully.
See image 2
3. For the outer handle tubes we'll install them at
a 45* angle. This leaves access to the mounting
holes for the next step. See image 3
Handle Tube / Tip Holder
NOTE: The Malone Striper4
factory oval, round, square and most aero-style cross bars. Suitable
for both roof top and trailer applications.
1
MPG126 FISHING ROD CARRIER
Mounting Bolts 2.5" & 3" (8 each)
Keys (2)
Socket Head Screws 1.5" (4)
Rod Holder can be safely attached to
tm
2
3
R