For Your Safety; Symbols On The Power Tool; Intended Use - Flex SE 125 18.0-EC Notice D'instruction D'origine

SE 125 18.0-EC
Contents

For your safety . . . . . . . . . . . . . . . . . . . 15

Noise and vibration . . . . . . . . . . . . . . . . 18
Technical specifications . . . . . . . . . . . . 19
Overview . . . . . . . . . . . . . . . . . . . . . . . . 20
Instructions for use . . . . . . . . . . . . . . . . 21
Maintenance and care . . . . . . . . . . . . . . 25
Disposal information . . . . . . . . . . . . . . . 26
Declaration of Conformity . . . . . . . . 26
Declaration of Conformity . . . . . . . . 26
Exemption from liability . . . . . . . . . . . . . 27
Symbols used in this manual
WARNING!
Denotes impending danger.
Non-observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.

Symbols on the power tool

Before switching on the power
tool, read the operating manual!
Wear goggles!
Wear ear protection!
Disposal information for the old
machine (see page 26)!
For your safety
WARNING!
Before using the power tool, please read
and follow:
- these operating instructions,
- the "General safety instructions"
on the handling of power tools in the
enclosed booklet (leaflet
- the currently valid site rules and the
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknow-ledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged.
The power tool may be operated only if it is
- as intended,
- in perfect working order.
Faults which impair safety must be repaired
immediately.

Intended use

The surface sander SE 125 18.0-EC is
designed
- for commercial use in industry and trade,
- for the dry surface grinding of metal, stone,
and wood as well as for the dry sanding
of paintwork,
- for use with Velcro sandpaper on backing
pads which FLEX offers for this device,
- for use with flap sanding discs which FLEX
offers for this device,
Tools must be authorised to run at a speed
of at least 3,000 rpm.
Cutting-off and grinding wheels must not
be used on this electric power tool.
When using the surface sander
SE 125 18.0-EC, connect a Class M dust
extractor.
no.: 315.915),
-
15