Machine Maintenance; Daily Maintenance - Tennant 2510 Manuel

Machine à polir à système de contrôle de la poussière de 36v
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6. Flip up hood support stand and rest hood on stand
to promote ventilation (Figure 23).
FIG. 23
7. The charger will automatically begin charging and
shut off when fully charged.
WARNING: Fire Or Explosion Hazard.
Batteries Emit Hydrogen Gas. Keep Sparks And
Open Flame Away. Keep Battery Compartment
Open When Charging.
8. After charging, check the electrolyte level (A)
again. The level should be approximately 1 cm
from the bottom of the fill--port (B) (Figure 24).
Add distilled water if needed. DO NOT OVERFILL.
B
A
Tennant 2510/2550 (08- -08)
Home
FIG. 24
Find... Go To..

MACHINE MAINTENANCE

To keep the machine in good working condition, simply
follow the daily, weekly, monthly and quarterly
maintenance procedures.
WARNING: Electrical Shock Hazard.
Disconnect Battery Cables Before Servicing
Machine.

DAILY MAINTENANCE

(After Every Use)
1. Remove the burnishing pad and clean or replace
(Figure 25).
FIG. 25
2. Empty or replace the dust control bag. Remove
the bag clip to empty bag (Figure 26). Do not allow
bag to fill beyond half full.
FIG. 26
3. Clean the machine with an all purpose cleaner and
damp cloth (Figure 27).
FOR SAFETY: When cleaning machine, do not
power spray or hose off machine. Electrical
malfunction may occur.
OPERATION
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

25509003531900353290035359003536

Table des Matières