Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3. Settings and adjustments for recording (continued)
Monitor adjustment
The colour contrast and brightness are adjusted whilst, built-in colour bar signals of the camera
are being displayed on the PC monitor.
MONITOR terminal
SCSI
MODE
SEND
AW/SEL
MENU
UP
DOWN
SET
FREEZE
MONITOR
REMOTE
DC IN
POWER
ON 1 2 3 4
SEE INSTRUCTION MANUAL
Dip switches
E28
All manuals and user guides at all-guides.com
1.
According to the system, set the MONITOR mode to
VGA.
ON 1 2 3 4
REC
PLAY
LENS
2.
Connect the VGA monitor to the MONITOR terminal.
3.
Set dip switches 4 on the rear of the camera to ON.
ON 1 2 3 4
4.
Turn the camera power to on.
5.
Adjust the VGA monitor.
MEMO
• For adjustment of the monitor, see the instruction manual of
the monitor.
• The default value of the peak level is set to 0.7 V. To change
the setting to 0.58V, select BAR LEVEL in the SYSTEM SET-
TING screen. (
• It is not possible to switch between the REC/PLAY modes
while the colour bar is displayed.
• Image data cannot be output to an MO/ Zip
or PC while the colour bar is displayed.
Set dip switch no. 3 located on the rear
of the camera to OFF.
Page 60)
®
drive, printer
Publicité
Table des Matières
