Incoming Calls; Activate/Deactivate Hands Free Function; Mute Function; Setting The Volume - Esscom BUTLER E550 TWIN Manuel D'utilisateur

5.5

Incoming calls

When a call comes in, the handset will start to ring. The
Press the line button
5.6

Activate/deactivate hands free function

This function allows you to communicate without having to pick up the handset. When you
are on the phone, press the Hands free button
Press the same button
When you are calling in hands free mode and you want to change the
volume, press the volume button
When you use the hands free function for a long time, the batteries will be
discharged faster !
5.7

Mute function

It is possible to deactivate the microphone during a conversation. Now you can speak openly
without being heard by your correspondent.
Press the mute button
appears on the display. Æ Press the mute button
mute symbol
to continue the conversation.
5.8

Setting the volume

During a conversation you can set the volume by pressing the volume button
set the volume alternatively in between 1-5. You can also use the left/right buttons
to save changes.
OK
The hands free receiver volume is also adjustable as above described!
5.9 Paging
When you press the paging button
30 seconds. This signal helps you find a lost handset. Press any button to stop the ringing
on a handset.

5.10 Flash button (R)

When you press the R button, also called flash or recall, the unit generates a line interruption
(of 100 ms or 300 ms). It gives you the possibility to use the special services of your
telephone provider and/or to transfer calls when you have a telephone exchange.
5.10.1 Setting the flash time by a single key press
Press and hold the redial button
or 'L' for 300ms Æ The flash time setting will disappear after 2 sec. from the display.
5.10.2 Setting the flash time by menu
Press menu button
the right button to scroll to 'RECALL' and press
to select 'LONG' (300ms) or 'SHORT' (100ms) and press
Esscom Butler E550 TWIN/TRIPLE
to answer the incoming call.
to deactivate the hands free function.
during a conversation. The microphone will be deactivated. The
on the base unit, the handset emits a ringing signal for
for 3 sec. Æ The display will show: 'S' for 100ms
ÆUse the right
button to scroll to 'BASE' and press
Esscom Butler E550 TWIN/TRIPLE
LED on the base will blink.Æ
to activate the hands free function.
.
Æ Use the right
OK
to confirm.
OK
again when you want
. You can
. Press
ÆUse
OK
and left button
9