Removing A Handset; Selecting A Base Unit; Automatic Selection; Manual Selection - Esscom BUTLER E550 TWIN Manuel D'utilisateur

the handset will mention it and will stop the registering procedure. Æ When the handset is
registered, it will show 'HANDSET' followed by the handset number.
8.2

Removing a handset

You can remove a handset from a base to allow another handset to be registered:
Press menu button
Æ Enter the pin code (0000) and press
to remove and press
successfully.
You can only remove existing handsets and others than the one you are
using.
8.3

Selecting a base unit

If your handset is subscribed to several base unit stations (max. 4), you must select a base
unit because the handset can only communicate with one base unit at a time. There are two
possibilities:

8.3.1 Automatic selection

If you set handset to automatic selection, the handset will automatically choose the closest
base unit in standby:
Press menu button
Æ Use the
button to scroll to 'SELECT BASE' and press
select 'AUTO' and press

8.3.2 Manual selection

If you set handset to manual selection, the handset will only choose the handset you have
set:
Press menu button
Æ Use the
button to scroll to 'SELECT BASE' and press
select 'Manual' and press
8.4

Call transfer and conference call during an external call

These functions only work when more than one handset (like a Twin/Triple/
Quattro version) is registered to the base!
During an external call, press the INT-button followed by the number (1-5) of the other
handset.
Æ The other handset will start to ring:
– When the other handset takes the line you can talk internally.
If you hang up, the external line will be connected with the other handset.
If you press and hold the INT-button for 3 seconds you can talk with the 2nd
handset and external line at the same time (conference call)
– Or press the INT-button again to return to the external call.
Æ Press the line button
Esscom Butler E550 TWIN/TRIPLE
ÆUse the
button to scroll to 'DE-REGISTER' and press
OK
. Æ The unit will go back to the previous menu if the removal is
OK
ÆUse the
button to scroll to 'HANDSET' and press
.
OK
ÆUse the
button to scroll to 'HANDSET' and press
. Æ Use the
OK
to end the call.
Esscom Butler E550 TWIN/TRIPLE
Æ Enter the handset number (1-5) you want
ÆUse the
OK
ÆUse the
OK
button to select base 1-4 and press
OK
OK
button to
OK
button to
OK
15