Troubleshooting; End Of Product Life; Symbology - Sunoptic Surgical Titan X450 Mode D'emploi

8.4 Troubleshooting

Problem
The power indicator (refer to
section 5) is not lit.
The power indicator is lit but the
lamp will not ignite.
9.

END OF PRODUCT LIFE

In accordance with the European Waste from Electrical and Electronic Equipment (WEEE)
directive, we encourage our customers to recycle this product whenever possible. Disposal of
this unit must be performed in accordance with the applicable local environmental regulations.
In the US a list of recyclers in your area can be found at: http:/www.eiae.org/.
Please contact customer service to issue a return authorization to return product to manufacturer
at the end of product life.

10. SYMBOLOGY

LIT-219 Sunoptic Surgical
Rev. F
Check that the AC power cord is properly connected
Check power input switch position
Check the circuit breakers.
If any inoperable fault condition is displayed on the screen,
correct the condition shown per section 6.2.1.
Manufacturer
Date of manufacture
(YYYY-MM-DD)
Symbol for Authorized Representative in the European
Community
Caution, consult accompanying documents
Consult Instructions for Use
CE mark
Do not use if package is damaged.
Not for disposal in general waste
Medical device
Caution: Hot Surface
®
Page 18 of 147
Solutions
If necessary, reset.
(English)