AM175
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d'Installation, Installatie gids
8
Concrete Installation
Two people are recommended for this step: one person to
level the mount and another person to mark the mounting
locations.
Il est recommandé deux personnes pour cette étape : une
personne pour niveler le Mont et une autre personne pour
marquer les emplacements de montage.
9
Drill four (4) pilot holes of each mark using a drill and 3/8" masonary drill
bit. Drill 3 inches deep.
Only use a 3/8" masonary drill bit when drilling pilot holes.
N'utiliser qu'un foret de 3/8" lors du forage de guidage.
10
Insert a Finned Anchor into each hole. Lightly tap each Finned Anchors
into place with a hammer.
Finned Anchor
11
Insert the lag bolts and washers into the Finned anchors.Tighten all lag
bolts using a socket wrench and 1/2" socket.
Do not over tighten the lag bolts.
Éviter de trop serrer les tirefonds.
x4
5/16" Flat Washer
Page 6
x4
x4
5/16" x 3" Lag Bolt