Table des Matières
Publicité
AM175
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d'Installation, Installatie gids
2
Two people are recommended for this step; one person to level the
Mount and another person to mark the wall stud location.
Il est recommandé deux personnes pour cette étape : une personne
pour niveler le Mont et une autre personne pour marquer l'emplace-
ment de l'ossature murale à claire-voie.
1)
Place the mount against the wall in the desired viewing location.
2)
Adjust the mount to align the mount slots in the wall plate with the center
of the wall studs.
3)
Level the mount.
4)
Use a pencil to mark the upper right mounting location along the center of
the wall stud.
3
Drill a "pilot hole" in the center of the upper right mark using a 1/4" drill bit and
power drill.
Only use a 1/4" drill bit when drilling pilot holes.
N'utiliser qu'un foret de 1/4" lors du forage de guidage.
4
1)
Place the Mount against the wall and align it with the pilot hole.
2)
Insert one (1) 5/16"x 3˝ lag bolt and one (1) 5/16" washer into the upper
right pilot hole.
3)
Use a socket wrench and a 1/2" socket to tighten the lag bolt.
Do not overtighten the lag bolt.
Éviter de trop serrer les tirefonds.
Page 4
X
X
Publicité
Table des Matières
