Making Coffee With Coffee Beans - tomado TGB0801S Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25

MAKING COFFEE WITH COFFEE BEANS

1. Lift the water reservoir from the coffee machine, fold open the cover and fill the reservoir under the tap with cold drinking
water up to the required level (2, 4 or 6 cups). Do not fill the reservoir above the 6 mark. Place the reservoir back in the
coffee machine.
2. Swing open the filter holder. Remove the ring-shaped cover of the filter holder. Place the permanent, washable filter or a
paper coffee filter (size 1x2) of which the edges have been folded back in the filter holder. This prevents the filter bag from
folding inwards and closing.
3. Place the ring-shaped cover back on the filter holder and swing the filter holder fully closed again.
4. Place the glass jug on the hot plate by sliding it under the filter holder with drip stop.
5. Put the coffee beans in the coffee bean holder on top of the coffee machine and place the cover back on the coffee bean
holder. We recommend not adding too many coffee beans, to prevent the unused beans from becoming damp in the coffee
bean holder. The holder is able to contain a maximum of 90 grams of coffee beans.
Warning: Only fill the coffee bean holder with coffee beans and make sure that no foreign objects end up in the holder. Also do
not use any unroasted or damp coffee beans. These might damage the appliance.
6. Insert the plug of the coffee machine in an earthed wall socket. The indicator light at buttons
7. Select the number of cups of coffee for which coffee beans should be ground. Press button
4 cups of coffee or
6
for 6 cups of coffee. Adjust this number to the amount of water poured in the water reservoir. The
indicator light at the pressed button lights up. If you do not press a button, the appliance selects the default setting of 6
cups of coffee.
8. Use the rotary knob on top of the coffee machine to select coarse or fine ground coffee. Turn the button to the large coffee
bean for coarse grind, or to the small coffee bean for fine grind.
9. Select the required coffee strength by pressing the button
button is pressed for extra strong coffee. If the indicator light does not light up, the coffee will be less strong.
10. Start the coffee machine by pressing the button
beans. Once the grinding process has been completed, the appliance will start making coffee after about 3 seconds.
11. When the filtering process has been completed, 3 beeps will sound. Take the glass jug from the hot plate and pour the
coffee. After making coffee, the hot plate will keep the coffee warm for 35 minutes, after which it switches off automatically.
3 beeps will sound and the indicator light at button
must remove the plug from the socket.
12. Coffee tastes best immediately after it has been made, so do not wait too long before serving. The glass jug can
immediately be placed back on the hot plate or you can pour the coffee into a thermos jug.
MAKING COFFEE WITH SHOP BOUGHT EXTRA-FINE GRIND
1. Lift the water reservoir from the coffee machine, fold open the cover and fill the reservoir under the tap with cold drinking
water up to the required level (2, 4 or 6 cups). Do not fill the reservoir above the 6 mark. Place the reservoir back in the
coffee machine.
2. Swing open the filter holder. Remove the ring-shaped cover of the filter holder. Place the permanent, washable filter or a
paper coffee filter (size 1x2) of which the edges have been folded back in the filter holder. This prevents the filter bag from
folding inwards and closing.
3. Scoop the required amount of coffee (extra-fine grind) into the filter bag or permanent filter and gently shake the filter
to even out the coffee. According to your taste, use 1 level measuring spoon per cup of coffee. This is approximately 5-7
grammes of coffee per cup. For 6 cups you will use 6 level measuring cups of extra-fine grind coffee.
4. Place the ring-shaped cover back on the filter holder and swing the filter holder fully closed again.
5. Place the glass jug on the hot plate by sliding it under the filter holder with drip stop.
6. Insert the plug of the coffee machine in an earthed wall socket. The indicator light at buttons
7. Select the number of cups of coffee for which coffee must be made. Press button
coffee or
6
for 6 cups of coffee. Adjust this number to the amount of water poured in the water reservoir. The indicator
light at the pressed button lights up. If you do not press a button, the appliance selects the default setting of 6 cups of
coffee.
. When the indicator light at the button lights up, the
ON
. After approximately 3 seconds, the appliance starts grinding the coffee
OFF
ON
switches off. If you want to switch off the appliance completely, you
OFF
COFFEE
EN - 15
6
and
lights up.
2
for 2 cups of coffee,
6
and
lights up.
2
4
for 2 cups of coffee,
for 4 cups of
4
for

Publicité

Table des Matières
loading

Table des Matières