Troubleshooting - LG DR4810 Mode D'emploi

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.
Symptom
No power. The power cord is disconnected.
No picture.
TV/DVD mode for the recorder is set to
TV.
The TV is not set to receive DVD
Recorder signal output.
The video cable is not connected
securely.
The connected TV power is turned off.
The equipment connected with the
No sound.
audio cable is not set to receive DVD
Recorder signal output.
The audio cables are not connected
securely.
The power of the equipment connected
with the audio cable is turned off.
The audio connecting cord is damaged.
The disc is dirty.
The playback picture is
poor.
No disc is inserted.
The DVD Recorder
does not start playback.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the guide.
The disc is dirty.
The Rating level is set.
The video signal from the external com-
The picture from the
ponent is copy-protected.
external input is distort-
ed
Those channels are not stored in the
Some channels are
recorder.
skipped over when
using v / V.
Aerial or cables are loose.
The picture or sound of
broadcasting channel is
weak or missing.
Camcorder is off.
Camcorder image is not
shown.
DVD Recorder INPUT SELECT is
Camcorder image via
incorrect.
A/V input or DV IN to
DVD Recorder is not
shown on TV screen.
All manuals and user guides at all-guides.com
Cause Solution
Plug the power cord into the wall outlet
securely.
Press TV/DVD on the remote control
repeatedly to choose DVD mode. TV
indicator disappears in the display
window.
Select the appropriate video input mode
on the TV so the picture from the DVD
Recorder appears on the TV screen.
Connect the video cable securely.
Turn on the TV.
Select the correct input mode on the
audio receiver so you can listen to the
sound from the DVD Recorder.
Connect the audio cable securely.
Turn on the equipment connected with
the audio cable.
Replace it with new one.
Clean the disc.
Insert a disc. (Check that the disc indi-
cator in the display window is lit.)
Insert a playable disc. (Check the disc
type, color system, and regional code.)
Place the disc with the playback side
down.
Place the disc on the disc tray correctly
inside the guide.
Clean the disc.
Cancel the Rating function or change
the rating level.
You cannot connect via this recorder.
Connect the component directly to your
TV.
Restore channels. See "Program Edit"
on page 18-19.
Tighten connections or replace cable.
Turn camcorder on and operate
properly.
Use AV to select input channel (AV1,
AV2, DV, etc.)
53