Changing The Audio Channel; 3D Surround; Subtitles; Instant Skip - LG DR4810 Mode D'emploi

Operation with DVD and Video CD (Continued)

Changing the Audio Channel

STEREO
VCD VR
With a Video CD, press AUDIO then press b / B
repeatedly during playback to hear a different audio
channel (STEREO, LEFT or RIGHT).
With DVD-RW discs recorded in VR mode that have
both a main and a Bilingual audio channel, you can
switch between Main (L), Bilingual (R), or a mix of both
(Main + Bilingual) by pressing AUDIO.

3D Surround

DVD Video VR VCD
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
1 Press 3D SURR. then press b / B repeatedly during
playback to select "3D SUR.".
2 To turn off the 3D Surround effect, select "NORMAL".

Subtitles

DVD Video
Press SUBTITLE then press b / B repeatedly during
playback to see the different subtitle languages.

Instant Skip

DVD Video
Each press INSTANT SKIP skips forward 15 seconds.
ote
If appears, the feature is not available on the disc.

Finding Locations on a Disc

You can directly access any point on a video CD using
this function. Use this function only while a video CD is
playing. Playback jumps to the point specified.
1 Press SEARCH during playback.
The progress bar appears on the TV screen.
PBC
TRK 1
2 Use b / B to find a start position for playback.
3 Press ENTER to confirm the selected position.
Playback starts from the selected position.
ote
This function works only when no marker is memorized.
All manuals and user guides at all-guides.com

Last Condition Memory

This recorder memorizes the user settings for the last
disc that you have viewed. Settings remain in memory
even if you remove the disc from the recorder or switch
off the recorder. If you load a disc that had its settings
memorized, the latest stop position is automatically
recalled.
– Settings are stored in memory for use any time.
– This recorder does not memorize settings of a disc if
3D SUR.

PIP (Picture in Picture)

This function enables you to view the stored stations in
sub picture during playback.
OFF
VR
VR
On and off
VCD
Input mode selection for sub picture
Program selection for sub picture
33%
33%
Sub picture position change
Zoom Sub picture
DVD Video VR
otes
you switch off the recorder before commencing to
play it.
DVD Video VR VCD
Press PIP to switch on the sub picture, press this but-
ton again to switch it off.
Press AV to select the input mode for the sub picture.
Each time this button is pressed, each input mode for
the sub picture is displayed as shown below.
→ → → →
Tuner AV1 AV2 AV3
Use v / V to change the program when sub picture's
input is set to tuner. The selected program number is
displayed on the TV screen. You can view the select-
ed program by pressing STOP (x).
Press b / B repeatedly until desired position is
achieved. The sub picture moves clockwise or
counterclockwise.
Press ZOOM repeatedly to enlarge the sub picture,
the magnification level increases up to three steps.
AV4
33