Other Functions - AEG Ultramix Professional KM6 Serie Mode D'emploi

Other functions

1. Pulse function: If the machine is set
to speed 1/P, you can temporarily stop
the machine by pressing the "PULSE"
button on the speed selector. Pressing
it again will start the machine for 1,5
seconds. If you press continuously the
machine will work as long as you keep
the button pressed.
4. The machine starts and counts down
the elapsed time. You can pause the
work by pressing button, continue
by pressing it again.
If no time is selected, the display will
function as counter when the machine
is switched on
KM6xxx_Ultramix Professional_AEG.indd 29
All manuals and user guides at all-guides.com
2. You can also activate the pulse
function by pressing the
on the LCD. The machine displays the
time of operation on the LCD.
03:00
5. Work light and Power indicator
light: If the appliance is plugged in
and a speed is selected, a blue LED
lights up around the Speed selector.
A work light will also light up over the
working area. If the Speed selector is
moved to "OFF", the working light will
automatically shut off after 3 min.
4
1
3. Setting the timer: Press the
or the
the LCD starts flashing to indicate you
have entered into set timer mode. Set
the time you need by pressing the
"MIN" (minute) and the "SEC" (second)
buttons. Turn the speed selector to
the desired speed and press the
button.
6. Note: If the Speed selector is already
turned on before the appliance is
plugged in, both the blue Speed
selector LED light and the Work light
will flash OFF and ON to let you know
the Speed selector has been left on.
Turn the Speed selector to "OFF" and
the lights will stop flashing. Then
resume operating normally.
D
GR
NL
F
2 3
GB
5
, and
29
2016-04-06 15:14:19