Table des Matières
Publicité
Getting started
4. Firmly press down the back of bowl
GB
until it locks into position.
Warning! Never operate appliance
with the attachments wire whip, flat
beater or dough hook unless the bowl
is in place.
7. Place the bowl cover* on the bowl.
Gently push the cover down until it
locks into place. Only add ingredients
using the pouring hole on the bowl
cover.
*Included in specific models.
28
KM6xxx_Ultramix Professional_AEG.indd 28
All manuals and user guides at all-guides.com
5. Place an attachment on the
Attachment shaft: Align the slot
at the top of the attachment with
the pin on the Attachment shaft.
Push attachment up and turn it
counterclockwise until the pin is
locked into position. To remove
attachment, move it clockwise and
pull off.
8. Move the Speed selector from "OFF"
to desired speed (1/P-10). Once
mixing is complete, turn the Speed
selector to "OFF" and unplug the
appliance.
The elapsed time of operation
is shown on the LCD while the
machine is working. When you turn
the machine off the timer resets
automatically.
Note: Always start on the slowest
possible speed to avoid splashing
ingredients out of the bowl.
6. Move the bowl support arms
upwards. Turn the bowl lift handle
counter-clockwise until the bowl
support arm locks into position.
2016-04-06 15:14:18
Publicité
Table des Matières
