Unpacking The Product - Hoover HI1X8 Manuel D'instructions

40002960Eng.qxd 12/04/2005

Unpacking the product

Remove the machine from its packaging close to
the final location of the machine.
1. Cut carefully around the base of the
packaging.
2. Lay the machine on its back and remove the
base and the two polystyrene spacers on
each side of the machine. We recommend
that a second person assist in the lifting and
manoeuvring of the machine.
Dispose of the packaging safely.
Make sure it is out of the reach
of children, it is a potential
3. Return the machine to the upright position,
remove the remainder of the packaging and
the central screw in the transit bar.
4. Remove the four retaining screws in the
transit bar and pull out the transit bracket.
15:10 Page 5
source of danger.
5