Hoover HI1X8 Manuel D'instructions page 19

40002960Eng.qxd 12/04/2005 15:11 Page 19
PROGRAMME END
BY H M
1 30 14:00
In this example, when setting the Programmation Fin Du Cycle the
programme (as shown above) will end at 15:30.
Both options are very useful, but Absolute Time Mode is easier to use since
there is no need for you to calculate how many hours to leave before you
want the machine to end or start your chosen cycle.
You can select which option you require by pressing the Extra Rinçage button
until your preferred option is displayed, and then pressing the Super Rapide
button to accept the option you have chosen.
When you have entered your preferred Time Mode, the display will then ask
for Enable Final Beeping to be set.
Enable Final Beeping (default setting – YES)
Here you have the option to have a beeping alarm to let you know the wash
cycle has finished. By pressing the Extra Rinçage button you can scroll through
the YES and NO options.
To confirm your selection press the Super Rapide button and the screen will
then move to the next stage and ask you if you wish to Enable Memory.
Enable Memory (default setting – NO)
This is a useful feature if you frequently wash laundry using the same
programme. Selecting Enable Memory will tell the machine to remember the
last programme/functions used and set them in the memory. This feature
works only on the Cottons, Delicates, Synthetics and Woollens programmes.
The memory does not retain settings within the Special Programmes group.
Select YES or NO by using the Extra Rinçage button and confirm your
selection by pressing the Super Rapide button.
The display will now show a message asking if you require the Demo Mode to
be set. Please set this option to NO if this has not already been done. This
function is for SERVICE use only. If the demo mode option is set to YES, the
wash programme WILL NOT commence when you exit the Inter@ct 3D menu.
The Demo Mode must be set to NO for the wash cycle to commence. Select
NO using the Super Rapide button and confirm your choice with the Extra
Rinçage button. You will then be asked if you wish to Exit the Menu.
19