All manuals and user guides at all-guides.com GENERAL SETUP CONFIGURATION GÉNÉRALE TABLE CLAMP SETUP FIXATION À UNE TABLE L’UTILISATION DE CE DISPOSITIF EST AUTORISÉE SEULEMENT AUX CONDITIONS SUIVANTES : (1) IL NE DOIT PAS PRODUIRE DE BROUILLAGE, ET (2) L’UTILISATEUR DU DISPOSITIF DOIT ÊTRE PRÊT À ACCEPTER TOUT BROUILLAGE RADIOÉLECTRIQUE REÇU, MÊME SI CE BROUILLAGE EST SUSCEPTIBLE DE COMPROMETTRE LE FONCTIONNEMENT DU DISPOSITIF.
All manuals and user guides at all-guides.com LAPTOP SETUP INSTALLATION SUR LES GENOUX INFORMATION TO USER This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 4
All manuals and user guides at all-guides.com GENERAL SETUP 1. Insert 4 “AA” batteries into the battery compartment (9) located on the underside of the wheel base. 2. Plug the RF base station (10) into a PlayStation® port. 3. Set up the wheel in either the table clamp or laptop configuration (instructions are provided on the following page).
All manuals and user guides at all-guides.com ADVANCED FEATURES Changing modes Press the Mode button to switch between 3 playing modes: Digital (LED is off); Analog (LED is red); Negcon™ (LED is flickering red). Adjusting steering sensitivity This option allows the user to adjust how far the wheel must be turned to the right or left in the game. The default setting is full range responsiveness, the lowest sensitivity setting (the wheel has to be turned all the way in either direction to achieve full responsiveness).