Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
Make sure the room where you are using the machine is well ventilated
and spacious. Good ventilation is especially important when the machine is
used heavily.
•
Do not obstruct the machine's vents. Doing so risks fire caused by over-
heated internal components.
•
When new, electrical devices containing volatile materials will normally re-
lease emissions into the air of their vicinity. For this reason, for the first few
days after installation of a new device, strong ventilation inside the room
where it is placed is necessary.
•
Machine sound levels exceeding LWAd > 63 dB (A) are not suitable for
desk work environments, so place the machine in another room.
•
The tip-resistant caster table is required if the printer is to be used while
placed on the floor with the optional paper feed unit installed. Not using
the tip-resistant caster table risks injury to users and damage to the printer
resulting from toppling. The tip-resistant caster table can only be installed
by a service representative. Contact your service representative for details.
Note
To avoid possible build-up of ozone, make sure to locate this machine in a large
well ventilated room that has an air turnover of more than 30 m
Handling power cords and power plugs
This section explains safety precautions about handling power cords and
power plugs.
R
WARNING:
•
If the power cord is damaged and its inner wires are exposed or
broken, contact your service representative for a replacement. Use of
damaged power cords could result in fire or electric shock.
•
Do not use any power sources other than those that matches the
specifications shown in this manual. Doing so could result in fire or
electric shock.
•
Do not use any frequencies other than those that match the specifica-
tions shown. Doing so could result in fire or electric shock.
•
Do not use multi-socket adaptors. Doing so could result in fire or
electric shock.
/hr/person.
3
Publicité
Table des Matières
