Remote Control Keys - Philips 21PT4457/58 Mode D'emploi

Remote control keys

Screen information / permanent no.
To display / clear the program number,
name (if it exists), time, audio mode and
time remaining for the sleep feature.
Press the key for 5 seconds to activate
permanent display of the number.This
key is also used to exit from the menu.
Surround Sound (only available
on certain versions). To activate /
deactivate the surround sound
effect. In stereo, this gives the
impression that the speakers are
further apart. For models equipped
with Virtual Dolby Surround*, you
can experience Dolby Surround
Pro Logic sound effects. In mono, a
stereo spatial effect is simulated.
VCR key *
Pre-set sound
Used to access a series of stored
settings: , ,
Speech Music Theatre
and return to
Personal
To call up or exit the menus.
Cursor / Format
These 4 keys are used to navigate
through the menus.The
keys are used to enlarge or
compress the picture vertically.
Volume
To adjust the sound level
To mute or restore the sound.
Number keys
Direct access to the programmes.
For a 2 digit program, enter the
2nd digit before the dash
disappears.
Selection of EXT socket
Press several times to select
EXT1, EXT2, S-VHS and AV.
* "Dolby" and the double-D symbols
are trademarks of the Dolby
Laboratories Licensing Corporation.
Manufactured under license of Dolby
Laboratories Licensing Corporation.
* VCR key
The remote control lets you control the main functions of the VCR.
Press and hold down the VCR key located on the side of the remote control, then press one of the keys to access
b
% ∫
the VCR functions:
The remote control is compatible with all VCRs using the RC5 standard.
.
Menu
îÏ
Mute
£
H îÏ È¬
P
Radio / TV mode
To switch the TV set to radio or
TV mode (for versions equipped
with radio).
Standby
Lets you place the TV set on
standby.To turn on the TV, press
P
Teletext keys (p. 8), VCR keys
(p.11) and list of radio stations
(p. 5)
Sleep
To select an automatic standby after a
preset time (from 0 to 240 minutes).
To enlarge or compress the
picture vertically
Pre-set image
Used to access a series of stored
settings:
Multimedia
Teletext (p. 8)
Program selection
To access the next or previous
programme.The number, (name)
and sound mode are displayed for
a few moments.
For some programs, the title of the
program will be displayed at the
bottom of the screen.
Teletext keys (p.8)
or VCR keys *
Sound mode (only available on
stereo versions)
Used to force programmes in
Stereo
programs, to choose between
or
I
for Nicam reception, depending on
the programmes, you can force the
Stereo Nicam
select between
Nicam Dual II
The
forced position.
@# · ¢ Ê Æ 09
Â
@ @ b 0 9
, , to (or
, , ,
Rich Natural Soft
and return to
Personal
to or, for bilingual
Mono
. For TV sets equipped
Dual II
sound to
Mono
,
Nicam Dual I
and .
Mono
indication is red when in
Mono
).
ı
.
Dual
or
3