Installing The Mounting Bracket - LUCCI Air AIRFUSION Instructions

Airfusion Penta Installation Instructions
INSTALLING THE FAN

INSTALLING THE MOUNTING BRACKET

The ceiling fan must be installed in a location so that the blades are 300mm spacing from the tip of the
blade to the nearest objects or walls.
Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least 30kg,
with two long screws provided. Ensure at least 30mm of the screw is threaded into the support.
Fig. 2
NOTE: The bracket screws provided are for use with wooden structures only. For structures other
than wood, the appropriate screw type MUST be used.
Angled Ceiling Installation
This fan hanging system supports a maximum 20 degree angled ceiling
installation.
Fig. 3
5 | P a g e V e r 1 . 0