Intercom - AT&T TL96271 Guide D'utilisation

Multiple handset use

Intercom

Use the intercom feature for conversations between two handsets, or a
handset and the telephone base.
You can buy additional expansion handsets (AT&T model TL90071, sold
separately) for this telephone system. You can register up to 12 handsets to
the telephone base.
To initiate an intercom call:
Using a cordless handset:
1. Press MENU on the handset in idle mode.
2. Press CID or DIR to highlight Intercom, then
press SELECT.
• If you have one handset, your handset displays
Calling base. The destination handset rings and
displays HANDSET is calling.
• If you have more than one
displays INTERCOM and a list of registered handsets.
– Press CID or DIR to select a destination handset
and then press SELECT. Your handset displays
Calling HANDSET X, Calling BASE 0 or Calling all
devices when you choose Group.
-OR-
– Press 0 for BASE 0, 1-9 for HANDSET 1-9,
HANDSET 10,
HANDSET 12. Your handset displays Calling HANDSET X or Calling
BASE 0. The other handset rings and displays HANDSET X is calling.
-OR-
– Press TONE
The destination handset(s)
HANDSET X is calling, or HANDSET X is calling all when you choose
all handsets.
To answer an intercom call at the destination handset:
• Press HOME/
FLASH
To silence an intercom call:
• Press OFF/
CANCEL
handset. Its screen displays Ringer muted for a few seconds.
handset, your handset
TONE and 1 for HANDSET 11 or
and then # (pound key) to call all handsets.
or telephone base
or /SPEAKER. Both handsets show Intercom.
, MUTE/ or SILENCE
DELETE
73
Answering sys
Directory
Cal ler ID log
Intercom
BACK SELECT
INTERCOM
BASE
HANDSET
HANDSET
BACK SELECT
TONE and 0 for
TONE and 2 for
rings and displays
on the destination
0
1
2