Key Tone; Dial Mode - AT&T TL96271 Guide D'utilisation

Telephone settings
Handset settings

Key tone

The handset is set to beep with each key press. If you turn off the key tone,
there are no beeps when you press keys.
To change the setting:
1. Press MENU on the handset in idle mode to enter the
main menu.
2. Use CID or DIR to scroll to Settings, then
press SELECT.
3. Press CID or DIR to scroll to Key tone, then
press SELECT.
4. Press CID or DIR to adjust the key tone volume, then
press SET to save.
-OR-
Press OFF to turn off, then press
a confirmation tone.

Dial mode

The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To change the setting:
1. Press MENU on the handset in idle mode to enter
the main menu.
2. Press CID or DIR to highlight Settings, then
press SELECT.
3. Press CID or DIR to highlight Dial mode, then
press SELECT.
4. Press CID or DIR to choose Tone or Pulse, then
press SET to save. You hear a confirmation tone.
SET to save. You hear
39
SETTINGS
CID time sync
Rename handset
Key tone
BACK SELECT
KEY TONE VOLUME
OFF SET
SETTINGS
Rename handset
Key tone
Dial mode
BACK SELECT
DIAL MODE
Tone
Pulse
BACK SET