Answering System; Answering System Settings; Answer On/Off - AT&T TL96271 Guide D'utilisation

Answering system

Answering system settings

Answer ON/OFF

If you turn the answering system on, it answers calls and records messages
only on the home line. If your paired cell phone has voicemail, callers can
leave messages with that voicemail service.
If your answering system is turned off and you
change any of its settings, the answering system
automatically turns on again the screen displays
Calls will be answered.
When the answering system is turned on, the
/ANS ON light on the telephone base is on and
both screens display ANS ON.
To turn the answering system on or off:
Using the telephone base:
Press /ANS ON to turn the answering system on or off.
When the answering system is turned on, it announces,
"Calls will be answered.". The telephone base screen
displays Calls will be answered. When the answering
system is turned off, it announces, "Calls will not be
answered.". The telephone base screen displays Calls will
not be answered.
-OR-
1. Press MENU on the telephone base in idle mode to
enter the main menu.
2. Press CID or DIR to highlight Answering sys, then
press SELECT.
3. Press CID or DIR to highlight Answer ON/OFF, then
press SELECT.
4. Press CID or DIR to highlight On or Off, then press
SET to save. You hear a confirmation tone.
NOTES:
• If there is no remaining recording time, the answering system
announces "Calls will not be answered." and cannot be turned
on.
• If the total recording time is less than three minutes, the
answering system announces "Less than three minutes to
record." and your screens display Rec mem low.
• If the answering system is off, you may press
on the answering system during an incoming call. The answering system answers the
call immediately if there is remaining time.
/ANS ON on the telephone base to turn
113
Play messages
Answering sys
Directory
Cal ler ID log
BACK SELECT
ANSWERING SYS
Delete al l old
Record memo
Answer ON/OFF
BACK SELECT
ANSWER ON/OFF
OnHandset
Off
BACK SET