Uline H-3506 Guide Rapide page 3

11. Slide hinge bar into bottom hole of right hinge
bracket. (See Figure 7)
12. On the opposite side, push stop pin away from left
hinge bracket. (See Figure 8)
13. When pin clears bracket, push pin down and align
hinge bar in bracket hole. Let hinge bar slide into
bottom bracket hole. (See Figure 9)
14. Insert cotter pin through hinge bar hole near the
right hinge bracket. (See Figure 10)
PAGE 3 OF 9
ASSEMBLY CONTINUED
15. Follow steps 10-13 to install the lock bar, except lock
Figure 7
16. Insert cotter pin (or padlock, not included) to secure
Figure 8
17. Lock bars can also be used as a lid prop by
Figure 9
Figure 10
1-800-295-5510
uline.com
bar goes into the top hole of bracket. (See Figure 11)
lock bar. (See Figure 12)
inserting the stop pin into the lock bar bracket hole.
(See Figure 13)
Figure 11
Figure 12
Figure 13
0621 IH-3506