If You Have A Problem - Samsung VC-6813V Manuel D'instructions

6800-IB(EN)1 11/1/01 9:04 AM
OUTLET FILTER
1) Separate the exhaust filter.
NOTE:
The filters must be completely dried before being replaced in the dust compartment.
CYCLONIC FILTER
You can use a dust bag in your cleaner for a long time thanks to the Cyclonic Filter system and it main-
tain the maximum cleaning efficiency.
The larger particle of dust filtered from Cyclonic Filter remain in Dust Barrel when suctioned air and dust
revolves in the Cyclonic Filter. So the dust bag contains only smaller ones.
When the Dust Barrel is filled with dust up to the indicating line, it needs disposing and cleaning.
Dust Barrel can be cleaned in water.
1.Turn the Dust Barrel to the left and pull it.
2.Disconnect the Cyclonic Filter from extension wand and handle.
3.Remove thread and hair tangled around the net.
4.After cleaning the Dust Barrel and Cyclonic Filter,connect the Cyclonic Filter with extension
wand and handle(washed part should be dried in the shade throughly before assembling).
5.Push and turn the Dust Barrel to the right.
Adjust indicating marks each other carved on Dust Barrel and Cyclonic Filter.
CYCLONIC FILTER
DUST BARREL

IF YOU HAVE A PROBLEM

This appliance was inspected thoroughly and was in good operating condition when it was shipped from the factory.
If a minor problem occurs, it can usually be solved quite easily when the cause is found. Therefore, this
check list is provided for your convenience.
PROBLEM
Cleaner will not run.
Cleaner does not
Pick Up properly
All manuals and user guides at all-guides.com
Page 8
2) Reassemble it after cleaning or replacing
(ONLY CYCLONIC FILTER TYPES)
CREVICE
TOOL
POSSIBLE CAUSE
1. Not firmly plugged in.
2. No voltage in wall plug.
1. Dust bag is full.
2. Hose clogged with
a large object.
EN 1-7
the filter in the reverse order.
POSSIBLE SOLUTION
1. Plug in firmly.
2. Check fuse or breaker.
1. Change dust bag.
2. Remove the substance.