Cleaning & Maintenance - Levoit LV600HH Mode D'emploi

Masquer les pouces Voir aussi pour LV600HH:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

The Low Water Level Indicator
will appear on the display
when more water needs to be
added to the water tank. When
this happens, the humidifier
been added.
Cleaning &
Maintenance
Make sure the humidifier is disconnected
from any power source before cleaning.
Cleaning the Humidifier
1. Unplug the humidifier. Allow the device
and any remaining water to completely
cool before cleaning.
2. Remove the water tank from the base
and pour out any excess water. Pour out
any remaining water from the water tank.
3. Remove the air flume and mist tube.
Detach the mist tube from the air flume
by twisting the tube counterclockwise.
(see figure.cm1) Allow both parts to soak
in vinegar for 30 minutes.
4. Remove the green absorption pad inside
the heating element and rinse under clean
water. Dry the pad with a clean, dry cloth.
EN
figure.cm1
5. Add 1 cup of distilled white vinegar to
the inner chamber. Make sure there is
vinegar on each section of the chamber
including the atomization chip and
heating element. Allow the vinegar to
soak for 30 minutes. After 30 minutes,
scrub all parts of the inner chamber with
the included cleaning brush to remove
any mineral buildup.
12

Publicité

Table des Matières
loading

Table des Matières