Filling The Clean Water Tank - Oreck SURFACESCRUB FK40100 Serie Manuel Du Propriétaire

FILLING THE CLEAN WATER TANK

Pour cleaning solution into tank. Top up tank to
fill line with warm water (Max 100°F).
! !
WARNING!
TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK DUE TO INTERNAL
COMPONENT DAMAGE, USE ONLY ORECK
HARD FLOOR CLEANING SOLUTION FOR
USE WITH THIS APPLIANCE.
All manuals and user guides at all-guides.com
3. OPERATION
Twist the tank cap into place to secure.
! !
WARNING!
TO REDUCE THE RISK OF PERSONAL
INJURY—UNPLUG BEFORE CLEANING
OR SERVICING. DO NOT USE CLEANER
WITHOUT TANK IN PLACE.
! !
CAUTION!
WATER WILL DRIP FROM THE BRUSHES AND UNDERSIDE OF THE PRODUCT AFTER USE AND MAY PUDDLE.
TO AVOID DAMAGE TO WOOD AND LAMINATE FLOORING AND TO AVOID POTENTIAL SLIP HAZARD, AFTER
USE (A) DO NOT LEAVE THE PRODUCT ON WOOD AND LAMINATE SURFACES AND MOVE TO A HARD SURFACE
AND (B) PLACE UNIT ON ABSORBANT MATERIAL (SUCH AS A TOWEL) TO SOAK UP DRIPS.
Place the bottom of the Clean water tank onto
the machine first and click the top into place.