Changing The Filtration Bag - Oreck ELEVATE CONTROL UK30100 Manuel De L'utilisateur

Maintenance — Changing the Filtration Bag
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY,
UNPLUG BEFORE CLEANING OR SERVICING. DO NOT USE VACUUM
WITHOUT INNER FILTRATION BAG IN PLACE.
SaniSeal OPERATION
®
Your Elevate vacuum includes a filtration bag equipped with the SaniSeal
™
you change the bag.
1
Unzip the Filtration Bag Case
completely.
14
CAUTION
CORNSTARCH MAY SEAL THE INNER FILTRATION BAG AND CAUSE IT TO
BURST EVEN THOUGH IT IS ONLY PARTIALLY FULL. CHANGE THE BAG OFTEN
WHEN CLEANING THIS TYPE OF MATERIAL.
System. SaniSeal
®
2
Pull the cardboard collar on the filtration
bag downward to release the bag dock
from the dock port.
VERY FINE MATERIALS, SUCH AS FACE POWDER OR
automatically locks in allergens, dirt and debris each time
®
3
Gently pull the cardboard collar on
the filtration bag up to engage the
SaniSeal lock and remove from the
®
bag dock. Discard.