Parker Zander FL Série Notice D'utilisation page 21

Compressed air fi lter series FL
Series FL compressed air
fi lters
Filters of the FL series represent the current
state of research and development in fi ltra-
tion technology. Due to a wide spectrum
of available element types, they are very
versatile:
Filters with series VL element types are used
to separate particles with sizes of 3 μm and
come with a manual drain as standard.
Filters with series ZL and XL element types
are used to separate particles with sizes of
1 μm or 0.01 μm and come with an elec-
tronic condensate drain as standard.
Filters with series A element type are used
for adsorptive removal of gaseous organic
substances and come with a manual drain
as standard.
The high manufacturing quality of the used
elements, the use of cutting edge fi ltration
media and an optimised fl ow distribution
inside the elements ensure a low back
pressure and consequently low operating
costs. Since back pressure and fi ltration
performance were validated by independent
measurements, the performance can be
warranted for the entire service life of the
elements. Filters of the FL series are particu-
larly fail-proof and easy to maintain.
Standard equipment
The fi lters are supplied in a ready to operate
condition and can be installed directly into
the pipe system. Accessories that were
ordered but are not described here come in
separate packages und must be installed
according to the respectively enclosed
instructions.
FL17-140_Int1_Rev.00
Operating Instructions | EN
Product ID
The product ID for series FL compressed air
fi lters is made up of the following items:
FL
Examples:
FL 17 VL H
FL 60 XL D H
FL 100 XL D K3
Size 17, 20, 30, 40, 60, 100, 140
Element type VL (strainer fi lter)
ZL (fi ne fi lter)
XL (ultra-fi ne fi lter)
A (activated charcoal fi lter)
Options H (manual drain) *
D (differential pressure gauge)
K3 (condensate drain)
* Letter H not for fi lters with
element types from Series A
21