System Set Up & Checkout - Anden A320V1 Instructions D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SYSTEM SET-UP & CHECKOUT
Skip set up and proceed to INSTALLER TEST MODE on page 11 unless:
• A Model A76 or other external control is to be installed
• changing the air sampling rate
1. Check all wiring�
2. Make sure the wire access cover has been snapped back onto the
on-board control�
3. Plug unit in and turn power switch to ON�
4. The on-board control screen should display OFF�
90-1854
NOTE: If the display backlight is not on, the first button press (any
button) will only turn on the backlight� Press the button a second time
to achieve function�
5. Hold the MODE button on the on-board control for 3 seconds to
enter the Installer Set-up Menu�
6. Navigate through the following screens to set up the dehumidifier
for the installed application�
Use the UP or DOWN arrows to select items and use MODE to
switch to the next set-up option� To exit installer set-up, all options
must be scrolled through using the MODE button�
7. After the installer set up options have been completed, DONE will
blink for 3 seconds and the control will return to the OFF screen�
90-1854
10 English
All manuals and user guides at all-guides.com
REMOTE CONTROL
VENTILATION / AIR CYCLING
The ventilation feature can be used for air cycling if desired� The air
cycling time can be set from 0 – 60 minutes� The dehumidifier will turn
on the dehumidifier fan to cycle air for the set time, every hour�
90-1854
If not installing a Model A76, leave
DISABLED and press MODE to go
to the next screen�
90-1854
If installing a Model A76, press the
UP or DOWN button to change to
ENABLED and then press MODE to
go to the next screen
90-1854
If not using the dehumidifier to
cycle air, press MODE to got to the
next screen�
90-1854
If using the dehumidifier for air
cycling, press the UP or DOWN
button to ENABLE the feature and
press MODE to got to the next
screen�
90-1854
Press MODE to set air cycling to
TIMED�
90-1854
Press the UP or DOWN buttons to
adjust the air cycling time per hour
from 0 to 60 minutes� After
adjusting the time press MODE to
go to the next screen�
90-1854

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

A320v3

Table des Matières