Error Codes; Possible Causes - Samsung DW60H3010FV Manuel D'utilisation

Troubleshooting

ERROR CODES

If an error occurs an error code may be displayed to inform you:
CODES
DW60H6050
DW60H3010
DW60H5050
4E
HE
LE
tE
WARNING: If overflow occurs, turn off the main water supply before calling a service. If there is water
in the base pan because of an over fill or small leak, the water should be removed before restarting the
dishwasher.
44_ Troubleshooting
MEANING
Water supply error
Heater error
Leakage error
Failure of
temperature sensor

POSSIBLE CAUSES

Inlet water continually for 4 minutes in
any case or no water in normal water
inlet step.
Over 2L inletting except water inlet
step.
• If water inletting below low level
quantity at step when heater work,
heater is not work by safety device.
• If water inletting over low level
quantity at any step, heater is
controlled by thermister.
Heating continually for 60 minutes,
yet still not arrive the anticipated
temperature.
If the leakage switch is on for
2 seconds.
When power S/W is off, LE error is not
occurred when happen the leakage
on off-state, but if the door is closed,
the washer can drain away the water
automatically when happen the
leakage on off-state.
Abnormal of the thermistor (short
circuit/open circuit)
NOTE
DW60H6050
DW60H5050
DW60H3010