Troubleshooting - Energizer Arc 12 Guide De Démarrage Rapide

3. TROUBLESHOOTING

Problem
My Arc12 shut
down while
powering my
device.
My device is not
receiving power.
My Arc12
charge level is
fluctuating.
My Arc12 is not
charging.
Solution
If the AC icon
unit has overloaded. Press the AC button to turn off
and turn on again to reset. Max power limit for AC is
1,000W.
If the High Temperature icon
is blinking: Turn all ports off and remove unit from
heat source. Do not use until unit has cooled and
the icon disappears. Then turn the output on and try
again. Excessive heat will degrade the battery's life
span.
If the Low Temperature icon
is blinking: Turn all ports off and remove unit from the
cold. Do not use until unit has warmed and the icon
disappears. Then turn the output on and try again.
Ensure the power switch for the output you want to
use is on. For example if you want to charge your
phone turn USB on, then plug in your phone.
If the battery is very low, the Arc12 can't read the
charge as accurately. As it receives a charge the
accuracy will increase.
Your battery meter may need recalibration by
charging to 100%, draining until the unit turns off,
then charging back up to 100%.
Ensure that you are using the port labeled INPUT and
that all components are firmly connected.
4
on the digital display is blinking the
on the digital display
on the digital display