Operation; Setup" Mode - Renkforce C11 Mode D'emploi

All manuals and user guides at all-guides.com

Operation

• As described above (see chapter "Basic functions", section c), use buttons "<" (1) and ">"
(2) to select an item in the main menu.
• Confirm your selection of a function or a menu item by pressing the "M" button (4).
Proceed likewise in the submenus.
• Hold down the "M" (4) button to go back to the main menu.
• If no button is pressed for a period of time (time is adjustable to max. 30 seconds, see "LCD
Set" in the next section), the LC display switches itself off and the multimedia player quits
the settings without saving the changes (e.g. date/time).
a) "Setup" mode
1. "Clock" submenu
Use this menu to set the date and the time.
• Use buttons "-" (9) and "+" (10) to select the position to be changed (year/month/time or
hours/minutes/seconds). Use buttons "<" (1) and ">" (2) the change the value.
• Press the "M" button (4) to save your changes and go back to the menu.
• If no button is pressed for several seconds, your changes are discarded and the multimedia
player goes back to the menu.
2. "LCD Set" submenu
• "Screen savers": Here, you can specify the time after which the screen saver is activated.
• "Black": Here, you can specify the time after which the LC display is switched off to save
power.
• "Exit": Select this option to exit the submenu and go back to the menu.
52
Operating manual

English