Fm" Function - Renkforce MPF337 Mode D'emploi

d) "FM" function

When commissioning the player, you first have to set the right FM reception
range in the "Settings" menu (chapter "Operation", section a), point 2).
Select the "FM" function in the main menu with the rocker switch or the "+" and "-" buttons and
confirm by briefly pressing the rocker switch.

The cable of the connected earphones/headphones is used as an antenna.
You can subsequently switch on or off an additional menu with a brief pressing of the rocker
switch which enable the manual or automatic station search and the saving/deleting of radio
station in the radio storage location of the multimedia player.
If the menu is hidden (press the rocker switch briefly, if necessary), the volume can be set with
the "+" and "-" button (press the respective button longer for quick setting).

Please note: If the menu is shown, the selection of the menu options is done
with the "+" and "-" button and not the setting of the volume.
"Manual"
If you have selected this function with the rocker switch, briefly press the rocker switch.
Subsequently, a station or its frequency can be set by moving the rocker switch up or down
(hold the rocker switch in the upper or lower position for quick setting).
"Auto"
The pressing of the rocker switch will start the automatic search for the next strong station here.
"mem"
A list of storage positions will appear in which you can store the previously active radio
frequency. The frequency will be shown for already assigned storage locations, a corresponding
note will appear with empty storage locations.
Select the desired storage location in which you want to store the currently active radio
frequency with the rocker switch or the "+" and "-" buttons.
Briefly press the "/" button. A warning will appear prompting you to save or reject the
station.
54
All manuals and user guides at all-guides.com
Operating Instructions

English