Hotpoint Ariston HB 0701 AX0 Mode D'emploi page 14

it en
exceed the max capacity of the cup.
3. Plug the appliance into the power outlet.
4. Lower the hand blender into the food and rotate
the speed-adjusting dial to select the desired
speed. Pressing and holding the ON/OFF
For maximum-speed blending use the TURBO
button for a short time.
USE THE WHISK ATTACHMENT (only
on some models) (B)
The whisk attachment is mainly suitable for whisking
egg whites.
1. To assemble the whisk attachment to the motor
2. Place the food into the beaker.
3. Plug the appliance into the power outlet.
4. Lower the whisk into the food and rotate the
speed-adjusting dial to select the desired speed.
attachment starts whisking immediately. For
maximum-speed whisking use the TURBO
button for a short time.
USE THE SMALL BOWL FOR FINE
CHOPPING (only on some models) (C)
1.
the bottom of the bowl.
2. Fit the knife blade on the pin in the bowl - always
3. Cut the food into small pieces and put them into
the bowl.
smooth running of the appliance.
Never introduce very hard foods (e.g. hard
4. Close with the lid.
5. Assemble the motor unit into the bowl lid and
turn it clockwise to lock them.
6. Plug the appliance into the power outlet.
7. Rotate the speed-adjusting dial to select the
desired speed. Pressing and holding the ON/
immediately. For maximum speed press the
TURBO button for a short time.
8.
the mixture.
14
USING THE FOOD
PROCESSOR ATTACHMENT (D)
To use the chopping bowl (only on some models):
1.
the bottom of the bowl.
2. Fit the knife blade on the pin in the bowl - always
3. Cut the food into small pieces and put them into
the bowl.
smooth running of the appliance.
4. Align the two fasteners of the bowl lid with the
two clip positions of the bowl and push down to
lock them in place. Be sure to align the arrow on
the lid and the arrow on the bowl.
into its housing on the cover.
5. Assemble the motor unit into the bowl lid and
turn it clockwise to lock them.
6. Plug the appliance into the power outlet.
7. Rotate the speed-adjusting dial to select the
desired speed. Pressing and holding the ON/
immediately. For maximum speed press the
TURBO button for a short time.
8.
the mixture.
discs for processing (only on some
models) (E).
1.
the bottom of the bowl.
2. Then insert the disc shaft into the pin on the
the shredding /slicing disc onto the shaft with
the appropriate side upwards (one side is for
handling discs as they are very sharp.