Editing; Dubbing To A Vcr - JVC GR-D350U Manuel D'instructions

EDITING

32
EN

Dubbing To A VCR

To AV connector
Audio/Video
cable
(provided)
1Yellow to VIDEO IN
2Red to AUDIO R IN
3White to AUDIO L IN
VCR
1
Following the illustrations, connect the
camcorder and the VCR's input connectors.
2
Start playback on the camcorder. (
3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR's
instruction manual.)
4
To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
NOTES:
÷ It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
( pg. 13)
● To choose whether or not the following displays
appear on the connected TV
Date/time
÷
Set "DATE/TIME" to "ON" or "OFF".
( pg. 22, 25)
Time code
÷
TV
Set "TIME CODE" to "OFF" or "ON".
( pg. 22, 25)
Indications other than date/time and time code
÷
Set "ON SCREEN" to "OFF", "LCD" or "LCD/
TV". ( pg. 22, 25)
pg. 20)