All manuals and user guides at all-guides.com
INVERTER PROTECTION FEATURES
The LED Indicator light will turn from GREEN to RED and the inverter will turn itself off
automatically when:
1. The power input from the battery drops to 9.5V. (When the power input drops to 10.5V, an
alarm will sound for an extended period).
2. The power input from the battery exceeds 15.5V.
3. The continuous draw of the equipment or appliance being operated exceeds 900 watts.
4. The surge draw of the equipment or appliance being operated exceeds 1800 watts.
5. The circuit temperature exceeds 165 °F.
NOTE
•
The inverter is equipped with a thermal fan which is designed to run if the inverter should
need to be cooled while in operation. Automatic shut down caused by high circuit
temperatures will occur when the cooling fan is unable to maintain a cool enough
temperature for safe operation of the inverter.
•
In the event of automatic shut down or continuous audible alarm, turn the inverter rocker
switch to the OFF (0) position until the source of the problem has been determined and
resolved.
SAFETY PRECAUTIONS
For best results place the power inverter on a reasonably flat surface.
Keep the inverter dry. Do not expose it to rain or moisture. Do not operate the inverter if the device
being operated or any other surfaces that may come in contact with any power source are wet.
Water and many other liquids can conduct electricity which may lead to serious injury or death.
Avoid placing the inverter on or near heating vents, radiators or other sources or heat. Do not
place the inverter in direct sunlight. Ideal air temperature should be between 50°and 80°F .
In order to properly disperse heat generated while the inverter is in operation, keep it well
ventilated. While in use, maintain several inches of clearance around the top and sides of the
inverter.
Do not use the inverter near flammable materials. Do not place the inverter in areas such as
battery compartments where fumes or gases many accumulate.
P A G E 7