Wiring Diagrams - Dometic PERFECTCHARGE MCA1215 Instructions De Montage Et De Service

Connecting the device
Charging using the battery management system PerfectControl MPC01
(accessory) (12 V only)
➤ Set the DIP switches 1 to 3 on the MCA battery charger to "ON" (chapter "Setting
the DIP switches" on page 24).
You can find detailed information in the operating manual for MPC01.
Charging using the remote control MCA-RC1 (accessory)
I
NOTE
The length of the RJ-11 cable may not exceed 7 m.
➤ Insert one end of the RJ-11 cable into the socket (fig. 0 3, page 7) of the
MCA-RC1.
➤ Insert the other end of the RJ-11 cable into the TEMP/LIN1 socket on the MCA
battery charger.
8.3

Wiring diagrams

Example of a wiring diagram, 12 V: see fig. 5, page 6.
No. in
Explanation/function
fig. 5, page 6
1 MCA charger
2 Consumer
3 PerfectControl MPC01
4 12 V battery sensor IBS
5 12 V battery
6 Fuse
7 Starter battery
Example of a wiring diagram, 24 V: see fig. 6, page 6.
No. in
Explanation/function
fig. 6, page 6
1 MCA charger
2 12 V battery
3 Starter battery
22
All manuals and user guides at all-guides.com
MCA1215 – MCA2440
EN