Installing The Fan Without The Light Kit (Optional); Operation; Pull Chain Operating Instructions - HAMPTON BAY HAWKINS YG204-BN-D Mode D'emploi

Assembly — Installing the Light Kit (continued)
Assembly — Installing the Light Kit (continued)
12
Installing the fan without the
light kit (Optional)
Your fan is designed with a light kit (F). If you intend
case you intend to install the fan without the light kit
(F), attach the switch housing cover (MM) to the
switch housing located at the bottom of the motor
assembly (B) with light kit mounting screws (HH)
provided.

Operation

PULL CHAIN OPERATING INSTRUCTIONS

PULL CHAIN OPERATING INSTRUCTIONS
Install two pull chains and fobs (LL) onto the pull chains located in the
switch housing and light kit (F). Turn on the power and check the
operation of the fan.
The pull chain controls the fan speed as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low and 4 pulls - Off.
Speed settings for warm or cool weather depend on factors such as the
room size, ceiling height, number of fans, and so on.
To turn the light On or Off, pull the chain that is attached to the light
kit (F).
All manuals and user guides at all-guides.com
14
MM
LL
HH