Assembly — Installing the Light Kit
9
Attaching the light kit to the
switch housing
While holding the light kit (F) under your fan motor
assembly (B), locate two single white and blue wires
in the switch housing labeled "FOR LIGHT". Make the
polarized plug connections:
- White to white
- Blue to black
Carefully push all wires back into the switch housing.
Install the light kit assembly (F) onto the switch
housing with the three light kit mounting screws (HH)
provided. Be sure to tighten all screws.
All manuals and user guides at all-guides.com
10
B
HH
F
12
Installing the light bulbs
CAUTION:
Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
Install three 40-watt candelabra bulbs (not included).
Remove the metal nut (II), glass cap (JJ) and decora-
tive nut (KK) from the light kit (F).
F
II
JJ
KK