Installing The Glass Shade - HAMPTON BAY HAWKINS YG204-BN-D Mode D'emploi

Assembly — Installing the Light Kit (continued)
11

Installing the glass shade

CAUTION:
Before starting the installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
While holding the glass shade (G), slip the pull chain
(LL) from the switch housing into the outside hole in
the glass shade (G).
Feed the pull chain (LL) from the light kit stem
through the eyelet in the glass shade (G).
Place the glass shade (G) over the light kit stem.
Secure the glass shade (G) with the metal nut (II)
(rubber side on the top).
Fit the glass cap (JJ) onto the light kit stem and then
slip the pull chain from the side hole in the glass
shade (G) through the hole on the side of the glass
cap (JJ).
Feed the pull chain from the light kit stem through
the decorative nut (KK), and then thread the decora-
tive nut (KK) on securely. Do not overtighten.
All manuals and user guides at all-guides.com
13
LL
Please contact 1-877-527-0313 for further assistance.
F
G
II
JJ
KK
LL
HAMPTONBAY.COM