Attaching The Fan Blades - HAMPTON BAY HAWKINS YG204-BN-D Mode D'emploi

Assembly — Attaching the Fan Blades
7
Attaching the blades to the
blade arms
Attach blades (C) to the blade arms (D) using the
three screws with fiber washers provided with the
blade attachment hardware (AA). Start a screw with
fiber washer (AA) into the blade arm (D), do not
tighten. Repeat for the two remaining screws and
fiber washers (AA).
Tighten each screw securely starting with the center
screw. Make sure the blade (C) is straight. Repeat
steps for the remaining blades.
All manuals and user guides at all-guides.com
8
AA
C
D
11
Fastening the blade
assemblies to the motor
WARNING: To reduce the risk of personal injury, do not
bend the blade arms (D) while installing, balancing the blades
(C), or cleaning the fan. Do no insert foreign objects between
rotating fan blades (C).
Fasten the blade assemblies to the fan motor
assembly (E) by lining up the slots of the blade arms
(XX) with the tabs on the motor (YY), then tighten the
two screws and lock washers (GG) already installed
in the blade arms (D).
Repeat this procedure for the remaining blade arms
(D).
GG
XX
Please contact 1-877-527-0313 for further assistance.
E
YY
C
D
HAMPTONBAY.COM