Start by placing the insulation panel in the bottom of the Insert. Start installing the two lower parts of the hearth
surround, then continue with the left back section followed by the left side, fi nally install the right back section and
side.
Prior to positioning the smoke
baffl e on top of the hearth
surround's sides The diffuser
must be positioned up inside the
insert's heat exchanger, the dif-
fuser must rest against the front
edge of the heat exchanger, at
the rear edge there are hooks
that fi t into the diffuser.
8
Position the ash-pan and
castiron grate.
Smoke baffl e.
GB