Comet KE Classic Manuel D'utilisation Et D'entretien page 36

Activate the lever (30) of the water gun and start the detergent supply operation (only KE
•
Super and KE Xtra: in these models, the detergent supply takes place at high pressure).
• Rotate the ring nut of the nozzle-holding head (33) as shown in Fig. 1-a and then activate the
lever (30) of the water gun and start the detergent supply operation. Rotate the ring nut of the
nozzle holding head (33) as shown in Fig. 1-b to reset the operation of the high-pressure jet
(only KE Classic: in this model, the detergent supply takes place at high pressure).
WARNING
• When you have finished to use the detergent, keep the detergent adjusting knob (11)
TOTALLY closed, bringing it in position "0".
5.5 OPERATION WITH INHIBITOR FOR CALCAREOUS DEPOSITS
The KE Classic does not include a device with inhibitor for calcareous deposits in the series equi-
pment. A device with inhibitor for calcareous deposits and ionic acceleration is available only as
optional and must be installed on the suction and does not need any maintenance.
The KE Super and KE Xtra include a device with inhibitor for calcareous deposits in the series
equipment that prevents the formation of calcareous deposits in the circuit after the operation with
hot water. It is sufficient to pour the inhibitor NO-KAL, already duly proportioned, in the tank
(19) and to periodically check the level through the tank plug.
WARNING
• In the absence of inhibitor for calcareous deposits, to prevent damages to the proportioning
pump, fill the tank (19) with water.
All manuals and user guides at all-guides.com
36